Hybrid Resins
Features
-
Hybrid Resins
Product Tatio AcidValue
mgKOH/gHydroxyl value
mgKOH/gViscosity
200℃mPa.STg℃ Cure Cycle Tribo Gad
ovenProperties TDS SDS P3305-2 70:30 28~38 40~50 ~58 200℃/10° No Yes Yellowing resistance, excellent mechanical performance and flow properties. 
P3306-2 70:30 28~33 50~60 ~56 180℃/15° No Yes Good flow performance for glossy and matt-gloss products.
P3306-3 70:30 30~35 45~55 ~60 200℃/10° No No Medium curing, high Tg, good flow, suitable for high gloss effect product, outstanding mechanical properties.
P3307-2 70:30 30~35 40~50 ~62 200℃/10° No Yes Standard type resin, good comprehensive performance.
P3310 70:30 28-38 50-60 ~57 180°C/10' No Yes A high reactivity polyester resin, coatings based on it exhibit: Good flow. Outstanding mechanical properties. Good yellowing resistance.
P3310-1 70:30 28-38 50~60 ~57 180℃/10' - - a high reactivity polyester resin
P3317 70:30 30~35 55~75 ~58 180℃/10° No Yes Medium curing, excellent flow, suitable for high gloss effect, good mechanical performance.
P3319 70:30 30~35 25~35 ~56 160℃/10° No Yes Low temperature curing, good flow and mechanical performance, suitable for high gloss effect.
P3323 70:30 30~35 40~50 ~56 200℃/10° No No Good flow, outstanding mechanical properties. Suitable for high gloss effect.
P3326 70:30 30~35 45~55 ~60 180℃/10° No No Medium curing, good flow, suitable for high gloss effect, outstanding mechanical performance.
P3403-2 60:40 48~53 25~35 ~59 200℃/10° No No Standard type resin, good comprehensive performance.
P3408 60:40 48~53 30~40 ~58 180℃/10° No No Yellowing resistance, excellent mechanical performance and flow properties.
P3413 60:40 48~55 20~30 ~56 200℃/10° No No Good flow, outstanding pigment wet properties and good storage stability.
P3502 50:50 70~75 30~40 ~58 200℃/10° No No Medium curing, good mechanical performance, special purpose of wrinkle finish.
P3501-2 50:50 70~76 30~40 ~59 200℃/10° No No Good balance of flow and mechanical properties and good pigment wetting.
P3503 50:50 60~65 30~40 ~58 180℃/10° No No Medium curing, good flow effect and mechanical performance.
P3504 50:50 58~65 20~30 ~56 180℃/10° No No Fast curing, good flow and mechanical performance.
P3505 50:50 65~75 20~30 ~56 160℃/10° No No Fast curing, good balance of flow and mechanical properties.
P3506 50:50 68~75 20~40 ~60 200℃/10° No No Medium curing, good flow ,good storage stability.
P3506S 50:50 68~75 20~40 ~62 200℃/10° No No Medium curing, good flow, good storage stability, high Tg.
P3305T 70:30 30~35 40~50 ~58 200℃/10' - - 70:30 type polyester resin, for hybrid powder coatings purposes
P3508 50:50 70-75 35-45 ~65 180℃/10‘ NO NO Medium curing, good flow effect and mechanical performance.
P3313 70:30 30-35 40-50 ~62 180℃/10‘ NO Yes Medium curing, excellent flow, suitable for high gloss effect, good mechanical performance.
P3507 50:50 65~75 20~30 ~56 160℃/10' - - 50:50 type polyester resin, for hybrid powder coatings purposes
P3501G 50:50 70~76 30~50 ~59 200℃/10' - - 50:50 type polyester resin, for hybrid powder coatings purposes
P3416 60:40 48~55 30~40 ~58 180℃/10' - - 60:40 type polyester resin, for hybrid powder coatings purposes
P3411 60:40 48~55 25~35 ~58 200℃/10' - - 60:40 type polyester resin, for hybrid powder coatings purposes
P3410 60:40 48~55 15~25 ~55 200℃/10' - - 60:40 type polyester resin, for hybrid powder coatings purposes
P3408T 60:40 48~55 25~35 ~58 180℃/10' - - 60:40 type polyester resin, for hybrid powder coatings purposes
P3408S 60:40 48~55 25~35 ~58 180℃/10' - - 60:40 type polyester resin, for hybrid powder coatings purposes
P3408G 60:40 48~55 25~35 ~58 180℃/10' - - 60:40 type polyester resin, for hybrid powder coatings purposes
P3407 60:40 48~55 20~40 ~58 180℃/10' 160℃/15' - - indoor polyester type, for hybrid purposes
P3406 60:40 50~56 30~40 ~59 200℃/15' - - indoor polyester type, for hybrid purposes
P3405 60:40 48~55 20~40 ~58 200℃/10' - - indoor polyester type, for hybrid purposes
P3321 70:30 30~35 30~40 ~60 200℃/10' - - indoor polyester type, for hybrid purposes cure with 200C X 10 min. Flow and mechnical performance balance
P3319T 70:30 30~35 45~55 ~58 160℃/10' - - type polyester resin, for hybrid powder coatings purposes
P3318 70:30 48~55 45~55 ~58 160℃/15' - - indoor polyester type, for hybrid purposes
P3316 70:30 48~55 45~55 ~58 200℃/10' - - indoor polyester type, for hybrid purposes
P3315 70:30 31~33 45~48 ~58 200℃/10' 180℃/15' - - indoor polyester type, for hybrid purposes
P3308 70:30 30~38 50~60 ~58 200℃/10' - - indoor polyester type, for hybrid purposes
Need more information about extruder?
-
Contact
-
Product consultation
